PIGMENT 319

INSTRUCTIONS :

• Apply TS NAILS Top Coat No Wipe and cure for 30 seconds
• With an applicator, your fingertip or glove, apply the Pigment to the hardened Top Coat and polish it well onto the nail.
• Sometimes it can happen that the pigment cannot be polished in properly. If this is the case with you, it may have to do with the humidity or room temperature in your area.
• What to do then? Cleans the nail, make sure your hands are warm and rub the pigment into the nail again with a warm fingertip
• Then file a curb on the front of the nail with a TS NAILS File Strip of 220 grit
• Then remove all loose particles and dust from the nail with the TS NAILS Art Fan Brush . Please note : Do not use a hard brush for this, but a fan brush.
• Then seal the front of the nail a little with TS NAILS Bond
• Then apply a very thin layer of Top Coat No Wipe, only at the top of the nail and let it harden for 10 seconds.
• Then apply Top Coat No Wipe over the entire nail and let it harden for 30 - 60 seconds.